微波辅助快速制备核-壳型尿苷印迹聚合物及其在线富集应用研究

采用微波辅助加热,以尿苷为模板分子,丙烯酰胺(AA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,快速制备尿苷印迹聚合物,聚合时间大大缩短,仅为传统加热的1/8.采用红外光谱和扫描电镜对印迹聚合物进行表征,结果表明二氧化硅表面成功包覆尿苷印迹壳层;该印迹聚合物颗粒分散均匀,印迹壳层厚度约为100 nm.将该印...     

Aligned polymer fibers produced via an additive electric field

Electrospinning is known to be a highly versatile method to produce nanofibers, and several techniques have been developed to align nanofibers. In this paper, poly(vinyl alcohol) (PVA), poly(vinylpyrrolidone) (PVP), poly(propylene carbonate) (PC), poly(ethylene oxide) (PEO), PVA/Chitosan and PVA/Fe₃O₄ uniaxially aligned ultrafine fibers were obtained with electrospinning method by adding another electric field in the collection area. Alignment of the nanofibers was characterized by the use of digital cameras and field emission scanning electron microscopy, polarized Fourier transform infrared spectroscopy (FTIR), and wideangle X-ray diffraction (XRD). The mechanism of fiber alignment was investigated as well.     

Electrospun composite nanofibrous membrane as wound dressing with good adhesion

A photopolymerizationable mimic mussel protein structure monomer, dopamine methacrylamide (DMA), was synthesized. The photopolymerization of DMA was analysed by series real time near infrared spectroscopy (SRTIR). Dopamine methacrylamide/poly (ethylene oxide) (DMA/PEO) nanofibers were successfully prepared by electrospinning of aqueous DMA/PEO solution. Biocompatible nanofibrous membrane with good adhesion was produced by photocuring from the DMA/PEO nanofibers. The surface characterization and structure of the composite nanofibrous membrane were characterized by a scanning electron microscopy (SEM) and contact angle measurements. For identifying the potential crystalline of curing, a XRD method was used through comparing diffraction data. In the cell adhesion test we utilized the mouse fibroblast (L929) to exam the various use of the nanofibrous membrane as scaffolding materials for skin regeneration.     

[Re(CO)3Cl]‐Chelation‐Mediated Electronic Coupling between Two Amine Redox Sites through the 5,5′‐Positions of 2,2′‐Bipyridine

The electronic coupling between two amine redox sites bridged through the 5,5′‐positions of the [Re(CO)₃Cl]‐chelated 2,2′‐bipyridine was studied by the electrochemical, spectroscopic, and EPR analysis. Interestingly, multiple near‐infrared bands were observed in this new organic mixed‐valent system. The results are interpreted with the aid of DFT and TDDFT calculations.     

μ‐4,4′‐Bipyridine‐κ2N:N′‐bis[triaqua(4,4′‐bipyridine‐κN)cadmium(II)] bis(3‐aminobenzoate) bis(perchlorate) dihydrate: a novel supramolecular system constructed by π–π and hydrogen‐bonding interactions

The title dicadmium compound, [Cd₂(C₁₀H₈N₂)₅(H₂O)₆](C₇H₆NO₂)₂(ClO₄)₂·2H₂O, is located around an inversion centre. Each Cd^II centre is coordinated by three N atoms from three different 4,4′‐bipyridine ligands and three O atoms from three coordinating water molecules in a distorted octahedral coordination environment. In the dicadmium cation unit, one 4,4′‐bipyridine (4,4′‐bipy) molecule acts as a bidentate bridging ligand between two Cd metal ions, while the other four 4,4′‐bipy molecules act only as monodentate terminal ligands, resulting in a rare `H‐type' [Cd₂(C₁₀H₈N₂)₅(H₂O)₆] host unit. These host units are connected to each other viaπ–π stacking interactions, giving rise to a three‐dimensional supramolecular grid network with large cavities. The 3‐aminobenzoate anions, perchlorate anions and water molecules are encapsulated in the cavities by numerous hydrogen‐bonding interactions. To the best of our knowledge, this is the first example of a coordination compound based on both 4,4′‐bipyridine ligands together with discrete 3‐aminobenzoate anions.     

Efficient and Stable Thin-Film Luminescent Solar Concentrators Enabled by Near-Infrared Emission Perovskite Nanocrystals

A novel triphenylphosphine (TPP) treatment strategy was developed to prepare the near-infrared emission CsPbI₃ nanocrystal (NC)-polymer composite thin-film luminescent solar concentrators (LSCs) featuring high absolute photoluminescence quantum yield (PLQY), low reabsorption, and high stability. The PL emission of the LSCs is centered at about 700 nm with 99.4±0.4 % PLQY and narrow full width at half maximum (FWHM) of 75 meV (30 nm). Compared with LSCs prepared with classic CsPbI₃ NCs, the stability of the LSCs after TPP treatments has been greatly improved, even after long-term (30 days) immersion in water and strong mercury-lamp irradiation (50 mW cm⁻²). Owing to the presence of lone-pair electrons on the phosphorus atom, TPP is also used as a photoinitiator, with higher efficiency than other common photoinitiators. Large-area (ca. 75 cm²) infrared LSCs were achieved with a high optical conversion efficiency of 3.1 % at a geometric factor of 10.     

聚四氟乙烯对齿轮润滑成膜膏润滑性能的影响

作者以聚四氟乙烯(PTFE)为固体润滑剂填料对GM型齿轮润滑成膜膏进行了改进,并且研制出了两种新的成膜膏系列产品。经四球试验机、动静摩擦系数精密测定仪和SRV试验机评价的结果表明,添加PTFE的GM-2型成膜膏的承载能力和减磨性能都明显地比未添加的好;以PTFE为主要固体润滑剂填料的GM-3和MFC-1型两种润滑成膜膏也都具有良好的润滑性能,其中后者的性能与含PTFE的GM-2型成膜膏的接近。通过对摩擦轨迹的电子探针检测发现,PTFE在摩擦过程中于摩擦表面形成了转移膜,因而改善了润滑成膜膏的摩擦学性能。     

锯齿型与扶手椅型碳化硅纳米管光电性质第一性原理研究

本文基于密度泛函理论计算分析了手性参数为(17,0)、(20,0)、(26,0) (10,10)、(12,12)、(15,15)的碳化硅纳米管的能带图,态密度及主要光学性质。结果表明：锯齿型与扶手椅型碳化硅纳米管均具有明显的半导体性质;在相近直径下,扶手椅型碳化硅纳米管带隙宽度要大于锯齿型碳化硅纳米管的带隙宽度;碳化硅纳米管的光吸收峰在100nm~200nm之间,可用于制作紫外线探测器件。     

Influences of flexible defect on the interplay of supercoiling and knotting of circular DNA

Knots are discovered in biophysical systems, such as DNA and proteins. Knotted portions in knotted DNA are significantly bent and their corresponding bending angles are comparable with or larger than the sharp bending angle resulting in flexible defects. The role of flexible defects in the interplay of supercoiling and knotting of circular DNA were predicted by a Monte Carlo simulation. In knotted DNA with a particular knot type, a flexible defect noticeably enhances the supercoiling of the knotted DNA and the decreasing excitation energy makes the knotted portion more compact. A reduction in twist rigidity and unwinding of flexible defects are incorporated into the numerical simulations, so that interplay of supercoiling and knotting of circular DNA is studied under torsional conditions. Increasing unwinding not only results in a wider linking number distribution, but also leads to a drift of the distribution to lower values. A flexible defect has obvious effects on knotting probability. The summation of equilibrium distribution probability for nontrivial knotted DNA with different contour length does not change with excitation energy monotonically and has a maximum at an intermediate value of excitation energy around 5 kBT. In the phase space of knot length and gyration radius of knotted DNA, knot length does not anticorrelate with its gyration radius, which is attributed to the flexible defect in the knotted portion, which leads to the release of bending energy and inhibited the competition between entropy and bending energy.